Obviously, serious mold problems in New Jersey aren’t unique to the State. Mold has become a serious issue and has had a tremendous impact on people all over the united States.

This article was written at the time of Hurricane Ike and in reference to the concerns of the people of Galveston. Nonetheless, this is a great source of information that features five tips on how to choose reputable mold removal companies in New Jersey should you be in the position where you cannot do the NJ mold remediation yourself.

Learn how to avoid the fly-by-night fakes, find quality certified mold inspection and protect your wallet from unneccessary expenses and costs. I have also posted a video about a quality New Jersey water mold damage company that serves greater Hunterdon County. 

Mold Inspection & Removal Basics: 5 Tips To Help You Avoid Scammers

Due to the recent bad weather and storm surge related to Hurricane Ike, Galveston mold removal services have become one of the most in-demand needs in the area. Unfortunately, those impacted by storm related damage are increasingly prone to further victimization by workers pretending to be mold remediation experts. Learn how to protect your finances, your home and the health of your family when contracting for mold cleanup and removal by following these quick tips:

1. Verify that business license of the company. Make sure the company you are doing business with is fully licensed, bonded and insured – plus certified to perform the work of household mold removal in compliance with recognized standards.

2. Find out how long the company has been in business. Ask what type of warranty or guarantee on work is provided. Mold removal isn’t as easy as it may appear – heavily contaminated areas may require extensive remediation or repair; spores can spread throughout the air vents of a home only to reappear weeks or even months later. Make sure work will be done right the first time – not only will it reduce the long term cost of further repairs and escalating insurance (not to mention declining property values) but it also helps keep your family safe from the potential health risks associated with mold.

3. Get written estimates. Before contracting for certified mold inspection and any major work to be performed, obtain written estimates and an anticipated time for completion in order to avoid unpleasant surprises and costly delays. Don’t’ be afraid to shop around for second opinions especially if a specific estimate seems high or you don’t fully understand what is included in the work.

4. Find a company willing to work with your insurance policy. Chances are you may have a lot of unscheduled expenses ranging from high gasoline and hotel costs to replacing belongings. Dealing with a company willing and able to work directly with your insurance provider is one less thing to worry with.

5. Deal with a company that cares. In addition to fly-by-night vendors that suddenly crop up everywhere, it is essential to understand what is included and what isn’t when contracting for office or house mold removal. Work with a company willing to handle everything from start to finish; mold removal, air vent cleaning to remove spores, upholstery and rug cleaning, disposal, water damage to floors and carpeting etc.

Although it might sound like a tall order, it is possible to have everything done with just one call if you go with a reputable nationwide company like Kiwi Services.
Kiwi offers Mold Removal and Complete home care solutions.

Here’s a video from respected mold remediation company in NJ. Servpro, serving greater Hunterdon County in New Jersey, is a quick response insurance restoration company, ready at an instant to help you. If your home is in need of mold removal, they can be at your door in about an hour.

Related news and information about mold issues: What people are saying 

Stop Black Mold In Your New Jersey House
I was completely torn apart by not knowing what to do with my mold problem. I lost everything […

Buyer Beware Of The Discount Cheap Home Inspections
In New Jersey some of the lower price bottom feeder home inspection companies are teetering on bankruptcy. Consumers may believe they are getting a great deal.

WNYC – The Leonard Lopate Show: Mold & Dangerous Household Chemicals
Mold lives and grows where there is no light, low air movement, and moderate temperatures. Mold is absolutely not going to get near a light bulb if it can help it. 

How To Get Rid Of Structural Mold
Household mold removal of the many different varieties of mold, black or green, that can live in your house, one of them, stachybotrys, throws off spores.

Combating Mold – Home Improvement And Homeowner Advice On Mold
If the affected material is porous, it should be removed and thrown away. If the porous material mold is extensive, you should contact professionals to gather and remove. Lastly, never and I mean never mix household cleaners.

By: Eliz b

Article Directory: http://www.articledashboard.com

Kiwi provides Galveston Mold Removal services.

This is a very thorough article that covers several great mold inspection tips for New Jersey homeowners as well as mold testing information. Of course these mold inspection instructions are excellent even if you don’t live in NJ. If you have come to a point where you need mold abatement and remediation services in New Jersey, take a moment to read this information from a certified mold pro.

Mold Inspection NJ – Tips For Homeowners

I once received a call from a potential mold inspection client who feared that she may have hidden mold in her walls. She was concerned about possible hidden mold because a mold inspector told her that the ants observed in her property were a very likely sign of hidden "house mold" because ants eat mold.

Forget About House Ants

Before we discuss a few basic tips on how to look for mold and moisture problems around the house lets talk about how not to find mold. Do not depend on ants to let you know if you have mold. Ants are not a sign of mold infestation in your house. They are a sign that you have scraps of food or droplets of water in the house that the ants have discovered.

Check For Mold Odors

So what are some signs of mold? If you have had a leak then the first sign of mold may be musty / moldy odors in the vicinity of the leak, check for these odors. Of course you do not want to be looking for or sniffing for mold, or touching mold if their is even a slight chance that you may have a compromised immune system, allergy, asthma, or any other conditions that would put you at risk of a negative reaction resulting from any form of mold exposure. In addition this article in no way will equip you to conduct your own New Jersey mold inspection, it is just intended to give you a few simple tips. If you suspect a New Jersey mold problem, get certified mold and moisture inspections done for your NJ house and look at mold testing.

Check For Odors Near Your AC Ducts

Another mold inspection NJ trick is to check for mold in your house is to turn your AC off for a while, the longer the better but just several minutes will due if you have a serious problem. Next turn your AC back on and leave your thermostat alone for a while, turning it on and off to more than one cycle in several minutes can damage your compressor. Now immediately stand directly under the path of air flowing from a duct. If your AC unit or your homes ductwork is contaminated with mold you will smell the musty mold odors blowing in your face. Remember do not do this if you are asthmatic, allergic to mold, or have a compromised immune system, do not do this if their exist any chance that you may have any of the above mentioned conditions or any health conditions that could become a problem as the result of exposure to mold.

In ducts the odors build up when the AC is off and may dissipate after the AC has been on for a while. Please note minor moldy odors and minor mold contamination are not unusual in AC units and may not cause a problem for most people. Having a mold inspector sample the air from your ducts may not do you much good because mold in AC units is often vegetative, in other words in may be growing without producing many spores. Further investigation by having an experienced and certified New Jersey mold inspection done inside your AC unit.

Look for Mold On AC Registers And Coils

Metal AC register grills become cold as air exiting your duct passes through them. If you have high humidity condensation may form on these registers. AC coils are designed to form condensation when you simply use your AC unit in the cooling mode; this feature helps the system to remove humidity from your air. AC registers in humid buildings and coils in any building have a good chance of forming a mold problem. The bottom sides of AC coils sometimes grow large amounts of velvety Grey cladosporium mold or clear jelly like bacteria masses, and AC register form black cladosporium mold. So check your AC registers & coils for mold or call a mold inspection NJ expert.

Look For Spots In Basements And Closets

Sometimes mold does not start as the result of a leak in your home but may occur as the result of humidity problems, in such cases the mold typically starts in areas with poor circulation such as in basements, closets, and bathrooms, and may spread if your homes humidity is above 60%RH to 65%RH. Mold growing on drywall in bathrooms is typically black cladosporium or it may be pen asp. In your homes closets powdery mildew like white or green spots of mold are common. To find these molds look for light spots on black clothes, luggage, and shoes, it does not show well on light colored clothes.

Look For Spots On Water Damaged Building Materials

Small spots, smug marks, or a powdery residue in the area that became wet is a good indication of mold. Most mold spots are black, brown, green, or white. These initial growths of mold are typically very small at just a few millimeters across in the start. One way to tell a smudge mark, a bad paint job, or other marks and stains from mold is to rub it with a dry cloth.

Most molds will at least partially rub off or smear and leave a streak mark on the surface. This is because mold is intentionally designed to be friable (easily broken) in addition mold spores are intentionally designed to detach easily for dispersal.

Discoloration from scuff marks and paint etc will often not smear easily. Of course this method does not work all the time and is not full proof, but some times it is helpful to a degree in providing some preliminary info on what you may be dealing with. The best way to tell if a stain is mold is mold testing. Mold testing NJ samples would involve taking a small amount of the mold and sending it to a lab.

Check Window Caulking

Hidden mold inside walls is common and one of the primary reasons for hidden mold inside walls is window leaks. If you have even minor hairline defects in your window caulking it may let small amounts of rain water or sprinkler system water into your walls. Moderately or seriously defective caulking causes many mold problems in this mold inspector’s experience.

Inspect Baseboards

When water enters walls if flows down and soaks into your baseboards and causes them to swell, when they dry they shrink. Swelling and shrinking causes baseboards to separate from the wall slightly, you will see a small crack between the top of the baseboard and the wall. Water in your walls that causes baseboards to separate from your walls means water in your walls that may have caused mold.

Check Tack Strips

Tack strips under your carpet will become stained and rapidly rot if you have water entering your walls. Water in your walls means possible mold in your walls. Peeling your carpet back to see the tack strip located under the perimeters of your carpets may loosen or even damage your carpet, so if your carpet is important to you don’t pull it up to check your tack strips.

Don’t Forget Your Wallpaper

If heavy wall paper is installed in your New Jersey building or home, any moisture that enters these walls will become trapped behind the wall paper, moisture trapped behind wall paper mixed with wall paper glue is a perfect recipe for a serious mold problem. During mold inspections, wall paper is not typically peeled thus hidden mold may not always be discovered but it is common to find mold hidden behind wall paper. The vast majority of moldy wall paper is on perimeter walls, as apposed to on interior partition walls.

Perimeter walls are the walls of a building that abut the exterior of a building; these walls receive moisture from cracks and defective caulking on the exterior side of the walls. A professional New Jersey mold inspection behind sections of wall paper may reveal large amounts of hidden mold.

If you think you have a house mold problem, you may need mold inspectors in New Jersey to come out. If are concerned about possible resulting health problems, do not only rely on the tips from this article, do not rely on hungry ants, cheap mold inspectors, or divining rods. Hire a professional mold inspector who utilizes moisture meters, humidity meters, borescopes, and air samples to detect mold problems in your home and who provides professional NJ remediation recommendations.

Video showing certified mold water damage specialists in action.

Non-Toxic, Biodegradable Mold Clean Up Kit With Respirator and Proper Gloves
If your New Jersey home needs mold cleaning and prevention for areas under 30 square feet, this will help.

Mold Carpet Cleaning Spot Of Mold On Carpet
Test always on an inconspicuous spot first. The mold should not return in any case but you can add a preventative to the water to prevent any mold spores that try to return.

Mold And Allergies – DIY Mold Services
Mold detection continues to expand their services in South Jersey. Mold Detection has grown the South Jersey market considerably over the past few months.

New Jersey Mold Testing
Advanced Mold Testing provides air sampling, mold testing in NJ, and analysis in the greater New York, Connecticut, and New Jersey metropolitan area.

By: Daryl Watters -

Article Directory: http://www.articledashboard.com

Daryl Watters is president of A Accredited Mold Inspection Service, Inc.