Mold Air Testing and Home Tests For Mold

Mold Air Testing: Sometimes it can be a do it yourself jobAt times, you may have an excellent reason to want to conduct quality mold air testing in your home or office. Be aware however, home tests for mold that use either an air sampling method or a surface test with swab (or both) are not always needed. Of course, it will be up to you to make the final decision.

One general rule of thumb is that if you actually see the mold growing, you don’t need a test to tell you it is there. If people in the home are, however, getting sick, and you’re not sure what is causing their illness, a mold testing kit could do much to answer your questions.

This article below will also help in the decision process when it comes to mold air testing and home tests for mold.

First: Watch This Video about The Hidden Dangers Of Mold Exposure

Seven Reasons You Might Need Mold Air Testing

Think you don’t need mold air testing? You might reconsider after reading about these common mold concerns. Here are the top reasons you might need mold testing and no even know it.

Reason #1: You love antiques! Few people associate mold with art lovers but the fact remains, your love of antiques and heirloom quality rugs, fine furniture or other common tapestry items might put your home or office at risk for mold contamination. That musty odor often associated with age is often mold hidden deep in the fibers of fabrics, furnishing and other fine tapestries or linens. Mold spores are hardy – they can lay dormant for years until the right condition presents itself then viola’ – the spores have spread and you are now at risk.

Reason #2: You found a slow leak. Whether it was a leaky roof or broken pipe, slow leaks may cause a humid environment that makes the perfect breeding ground for mold spores especially if located near organic materials like wood or even carpet padding and fibers. Mold air testing, cleanup and a thorough inspection should be conducted to make sure the problem is eliminated.

Reason #3: You had a major flood. Major flooding – whether from burst pipes or storm damage – can result in the growth of mold and mildew in as little as 40 to 72 hours. Time is of the essence when dealing with water related damage – consider home tests for mold that use surface and mold air testing methods anytime you have experienced major flooding.

Reason #4: You have a humid area of the home. Basements are notorious for high humidity levels so in addition to performing a mold inspection, it is a good idea to consider mold air testing to verify what the naked eye might miss.

Reason #5: You are buying a home that you know little about. Any time you don’t know much about a home or piece of real estate it is a good idea to perform an inspection – unfortunately, most building inspections don’t routinely do mold air testing. It is usually a separate inspection or test. Take time to have it done anyway – it could save you more money in the long term.

Reason #6: You have unusual allergic or other health symptoms that could be caused by mold. A home test for mold is a good way to rule out potential health related issues stemming from your home. A top rated professional home mold test kit comes complete with a lab report letting you know exactly what you’re dealing with. It’s a small price for peace of mind.

Reason #7: You are selling a home. Don’t be caught off-guard by unpleasant surprises – instead, find out about any potential problems in advance then take care of them to make sure you get top price and don’t frighten away would be buyers. Go with a reputable company like Kiwi services that provides home mold testing, New Jersey mold removal services to handle your every need with just one quick call. From mold remediation to floor cleaning, your home will look its best and be ready for sale in no time at all.

This video features a home allergy mold air testing kit and news story about the effects of indoor air pollution.

More Mold Air Testing and Mold Killing News and Products That Can Help:

House mold cleaning kit, safe, non toxicTotal Household Cleaning Kit Is All Natural 100% Biodegradable And Environmentally Safe
Powerful enough to prevent mold from amplifying, and helps prevent mold from ever returning.

Home Mold Testing – New Jersey – The Riverhead News
Once they did the mold test [in September], the industrial hygienist, they said get out of the house immediately, that we have unlivable mold contamination throughout our entire home. An attorney representing Westminster Communities, which has overseen impressive residential development projects in New York, New Jersey and Pennsylvania, said the company this week arranged to send an engineer to inspect the colonial-style home.

The importance Of UV Light And Negative Ions For Air Purification
These are now proven, in five different ways, to eliminate harmful dust, mold, allergens, pet odors and even help reduce allergy and asthma symptoms more than any other indoor air purifier

Clearing The Air On Indoor Air Cleaners
Regardless of whether an indoor environment is the product of new construction or renovation, providing good indoor air quality starts during the design and construction phases and continues throughout a building’s life.

EIFS in New Jersey Home Inspection
The trapped water can cause wood rot, and is very conducive to mold growth. As a New Jersey home inspector it is imperative for me to identify this type of siding to my clients. When inspecting a home if I come across EIFS, I always recommend further testing by an EIFS specialist because if water is trapped behind the EIFS it is very expensive to remove all the exterior siding on the home.

By: Eliz b

Article Directory: http://www.articledashboard.com

Kiwi provides mold air testing and mold removal services.

Mold Inspection NJ : Certified Mold and Moisture Inspections

This is a very thorough article that covers several great mold inspection NJ tips for New Jersey homeowners as well as mold testing information. Of course these mold inspection instructions are excellent even if you don’t live in NJ. If you have come to a point where you need mold abatement and remediation services in New Jersey, take a moment to read this information from a certified mold pro.

Mold Inspection NJ – Tips For Homeowners

I once received a call from a potential mold inspection client who feared that she may have hidden mold in her walls. She was concerned about possible hidden mold because a mold inspector told her that the ants observed in her property were a very likely sign of hidden “house mold” because ants eat mold.

Tips For Mold Inspection NJ – Forget About House Ants

Before we discuss a few basic tips on how to look for mold and moisture problems around the house lets talk about how not to find mold. Do not depend on ants to let you know if you have mold. Ants are not a sign of mold infestation in your house. They are a sign that you have scraps of food or droplets of water in the house that the ants have discovered.

Tips For Mold Inspection NJ – Check For Mold Odors

So what are some signs of mold? If you have had a leak then the first sign of mold may be musty / moldy odors in the vicinity of the leak, check for these odors. Of course you do not want to be looking for or sniffing for mold, or Mold inspection NJ could reveal mold as the source for allergiestouching mold if their is even a slight chance that you may have a compromised immune system, allergy, asthma, or any other conditions that would put you at risk of a negative reaction resulting from any form of mold exposure. In addition this article in no way will equip you to conduct your own mold inspection NJ, it is just intended to give you a few simple tips. If you suspect a New Jersey mold problem, get certified mold and moisture inspections done for your NJ house and look at mold testing.

Tips For Mold Inspection NJ – Check For Odors Near Your AC Ducts

Another mold inspection NJ trick is to check for mold in your house is to turn your AC off for a while, the longer the better but just several minutes will due if you have a serious problem. Next turn your AC back on and leave your thermostat alone for a while, turning it on and off to more than one cycle in several minutes can damage your compressor. Now immediately stand directly under the path of air flowing from a duct. If your AC unit or your homes duct work is contaminated with mold you will smell the musty mold odors blowing in your face. Remember do not do this if you are asthmatic, allergic to mold, or have a compromised immune system, do not do this if their exist any chance that you may have any of the above mentioned conditions or any health conditions that could become a problem as the result of exposure to mold.

In ducts the odors build up when the AC is off and may dissipate after the AC has been on for a while. Please note minor moldy odors and minor mold contamination are not unusual in AC units and may not cause a problem for most people. Having a mold inspector sample the air from your ducts may not do you much good because mold in AC units is often vegetative, in other words in may be growing without producing many spores. Further investigation by having an experienced and certified mold inspection NJ done inside your AC unit.

Tips For Mold Inspection NJ – Look for Mold On AC Registers And Coils

Metal AC register grills become cold as air exiting your duct passes through them. If you have high humidity condensation may form on these registers. AC coils are designed to form condensation when you simply use your AC unit in the cooling mode; this feature helps the system to remove humidity from your air. AC registers in humid buildings and coils in any building have a good chance of forming a mold problem. The bottom sides of AC coils sometimes grow large amounts of velvety Grey cladosporium mold or clear jelly like bacteria masses, and AC register form black cladosporium mold. So check your AC registers & coils for mold or call a mold inspection NJ expert.


Tips For Mold Inspection NJ – Look For Spots In Basements And Closets

Sometimes mold does not start as the result of a leak in your home but may occur as the result of humidity problems, in such cases the mold typically starts in areas with poor circulation such as in basements, closets, and bathrooms, and may spread if your homes humidity is above 60%RH to 65%RH. Mold growing on drywall in bathrooms is typically black cladosporium or it may be pen asp. In your homes closets powdery mildew like white or green spots of mold are common. To find these molds look for light spots on black clothes, luggage, and shoes, it does not show well on light colored clothes.

Tips For Mold Inspection NJ – Look For Spots On Water Damaged Building Materials

Mold inspection NJ - Water issues are the number one concernSmall spots, smug marks, or a powdery residue in the area that became wet is a good indication of mold. Most mold spots are black, brown, green, or white. These initial growths of mold are typically very small at just a few millimeters across in the start. One way to tell a smudge mark, a bad paint job, or other marks and stains from mold is to rub it with a dry cloth.

Most molds will at least partially rub off or smear and leave a streak mark on the surface. This is because mold is intentionally designed to be friable (easily broken) in addition mold spores are intentionally designed to detach easily for dispersal.

Discoloration from scuff marks and paint etc will often not smear easily. Of course this method does not work all the time and is not full proof, but some times it is helpful to a Mold testing kit with lab report for New Jersey includes consultationdegree in providing some preliminary info on what you may be dealing with. The best way to tell if a stain is mold is mold testing. Mold testing NJ samples would involve taking a small amount of the mold and sending it to a lab.

Tips For Mold Inspection NJ – Check Window Caulking

Hidden mold inside walls is common and one of the primary reasons for hidden mold inside walls is window leaks. If you have even minor hairline defects in your window caulking it may let small amounts of rain water or sprinkler system water into your walls. Moderately or seriously defective caulking causes many mold problems in this mold inspector’s experience.

Tips For Mold Inspection NJ – Inspect Baseboards

When water enters walls if flows down and soaks into your baseboards and causes them to swell, when they dry they shrink. Swelling and shrinking causes baseboards to separate from the wall slightly, you will see a small crack between the top of the baseboard and the wall. Water in your walls that causes baseboards to separate from your walls means water in your walls that may have caused mold.

Tips For Mold Inspection NJ – Check Tack Strips

Tack strips under your carpet will become stained and rapidly rot if you have water entering your walls. Water in your walls means possible mold in your walls. Peeling your carpet back to see the tack strip located under the perimeters of your carpets may loosen or even damage your carpet, so if your carpet is important to you don’t pull it up to check your tack strips.

Tips For Mold Inspection NJ – Don’t Forget Your Wallpaper

If heavy wall paper is installed in your New Jersey building or home, any moisture that enters these walls will become trapped behind the wall paper, moisture trapped behind wall paper mixed with wall paper glue is a perfect recipe for a serious mold problem. During mold inspections, wall paper is not typically peeled thus hidden mold may not always be discovered but it is common to find mold hidden behind wall paper. The vast majority of moldy wall paper is on perimeter walls, as apposed to on interior partition walls.

Perimeter walls are the walls of a building that abut the exterior of a building; these walls receive moisture from cracks and defective caulking on the exterior side of the walls. Mold inspection NJ homes means looking behind sections of wall paper that may reveal large amounts of hidden mold.

If you think you have a house mold problem, you may need mold inspection NJ pros to come out. If are concerned about possible resulting health problems, do not only rely on the tips from this article, do not rely on hungry ants, cheap mold inspectors, or divining rods. Hire a professional mold inspector who utilizes moisture meters, humidity meters, borescopes, and air samples to detect mold problems in your home and who provides professional NJ remediation recommendations.

Video showing certified mold water damage specialists in action.

Mold inspections and mold clean up kits are available.Non-Toxic, Biodegradable Mold Clean Up Kit With Respirator and Proper Gloves
If your New Jersey home needs mold cleaning and prevention for areas under 30 square feet, this will help.

Mold And Allergies – DIY Mold Services
Mold detection continues to expand their services in South Jersey. Mold Detection has grown the South Jersey market considerably over the past few months.

By: Daryl Watters -

Article Directory: http://www.articledashboard.com

Daryl Watters is president of A Accredited Mold Inspection Service, Inc.